Create Igmp_Snooping Multicast_Vlan; Config Igmp_Snooping Multicast_Vlan - D-Link DGS-1100-16/ME Reference Manual

Restrictions
Example usage:
To delete the igmp snooping static group:
DGS-1100-24P/ME:admin#delete igmp_snooping static_group vlanid 1
225.0.0.1
Command : delete igmp_snooping static_group vlanid 1 225.0.0.1
Success.
DGS-1100-24P/ME:admin#

create igmp_snooping multicast_vlan

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To create an igmp snooping multicast VLAN:
DGS-1100-24P/ME:admin#create igmp_snooping multicast_vlan test 8
Command : create igmp_snooping multicast_vlan test 8
Success.
DGS-1100-24P/ME:admin#

config igmp_snooping multicast_vlan

Purpose
Syntax
Description
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
static group is to be deleted. The range is from 1 to 4094.
<ipaddr> − The multicast group IP address.
Only administrator-level users can issue this command.
To create an IGMP snooping multicast VLAN on the Switch.
create igmp_snooping multicast_vlan <vlan_name 8> <vlanid 2-
4094>
The create igmp_snooping multicast_vlan command creates an
IGMP snooping multicast VLAN on the Switch.
<vlan_name 8> − The name of the VLAN for which IGMP snooping
is to be created. Up to 8 characters can be used.
<vlanid 2-4092> − The ID of the VLAN for which IGMP snooping is
to be created. The range is from 2 to 4094.
Only administrator-level users can issue this command.
To configure IGMP snooping multicast VLAN on the Switch.
config igmp_snooping multicast_vlan <vlan_name 8> { action
[add | delete] [member_port <portlist> | source_port <portlist> |
tag_member_port <portlist >] |state [enable | disable] |
replace_source_ip <ipaddr> } (1)
The config igmp_snooping multicast_vlan command enables
IGMP snooping multicast VLAN on the Switch.
95