Upload - D-Link DGS-1100-16/ME Reference Manual

Connecting to Server................... Done.
Download firmware...................... Done.
DGS-1100-24P/ME:admin#
To download a configuration file:
DGS-1100-24P/ME:admin#download cfg_fromTFTP 10.90.90.45 cfg.bin running_cfg
Command : download cfg_fromTFTP 10.90.90.45 cfg.bin running_cfg
Connecting to Server................... Done.
Download configuration............... Done.
DGS-1100-24P/ME:admin#

upload

Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To upload a firmware file:
DGS-1100-24P/ME:admin#upload firmware_toTFTP 10.90.90.45 firmware.flash
image_id 1
Command : upload firmware_toTFTP 10.90.90.45 firmware.flash image_id 1
Connecting to Server................... Done.
DGS-1100/ME Metro Ethernet Managed Switch CLI Reference Guide
To upload the current switch settings to a TFTP server.
upload { firmware_toTFTP <ipaddr> <path_filename (64)>
image_id <1,2> | cfg_toTFTP <ipaddr> <path_filename (64)>
[ include_password | exclude_password ] }(1)
The upload command uploads the Switch's current settings to a
TFTP server.
Note: When upgrading the firmware on the DGS-1100/ME Series
switch, only the image not currently active can be upgraded. All
DGS-1100/ME Series switches come with two images, however only
one can be active at any time. (e.g. If image 1 is currently in use,
only image 2 can be upgraded, and vice versa.)
firmware_fromTFTP − Specifies that the Switch's current firmware
are to be uploaded to the TFTP server.
<ipaddr> − The IPv4 address of the TFTP server. The TFTP server
must be on the same IP subnet as the Switch.
<path_filename 64> − The location of the Switch configuration file on
the TFTP server.
image_id <value (1-2)> - Upload firmware image file ID 1 or 2.
cfg_fromTFTP − Uploads a switch configuration file from a TFTP
server.
include_password - Upload configuration file includes passwords.
exclude_password - Upload configuration file excludes passwords.
Only administrator-level users can issue this command.
50