Main Menu - Christie LWU505 User Manual

Basic Operation
For detailed functions of each menu, see "Menu Tree" on pages 76-78.
Input
Used to select an input source (Input 1, Input 2, Input 3 or Network) (p.33).
: Network
PC adjust
Used to adjust the parameters to match with the input signal format (pp.37-39).
Image select
For computer source, used to select an image level among Dynamic, Standard, Real, and Image 1-10
(p.40).
For Video source, used to select an image level among Dynamic, Standard, Natural, Cinema, and
Image 1-10 (p.46).
Image adjust
For computer source, used to adjust the computer image. [Contrast/Brightness/Iris/Color temp./White
balance (R/G/B)/Offset(R/G/B)/Sharpness/Gamma/Reset/Store] (pp.41-42).
For video or HDMI source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Iris/Color
temp./White balance (R/G/B)/Offset (R/G/B)/Sharpness/Gamma/Noise Reduction/Progressive/
Reset/Store] (pp.47-48).
Screen
For computer source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/True/
Custom/Custom adj./Digital zoom +/-/Keystone/Ceiling/Rear/Screen aspect/Reset] (pp.42-44).
For video or HDMI source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/Natural
Wide/Custom/Custom adj./Keystone/Ceiling/Rear/Screen aspect/Reset] (pp. 49-50).
Sound
Used to adjust the volume or mute the sound (p.28).
Setting
Used to set the projector's operating configurations (pp.51-65).
Information
Display the input source information: Input, System, H-sync freq., V-sync freq., Screen, Language,
Lamp status, Lamp counter, Filter counter, Power management, Key lock, PIN code lock, Shutter
management, Simple mode, Remote control, and SERIAL NO. (p.29).
Network
See the user manual of "Network Set-up and Operation".
Guide
The key operation is displayed.
26

Main Menu

Main Menu
Sub-Menu
LWU505 User Manual
020-000374-01 Rev.1 (01-2011)