Navigating The Menus; Main Menu - Christie M Series User Manual

Exit
Press E
XIT
to return to the previous level, such as the previous menu.
NOTE: E
XIT
does not save changes within text editing boxes (including number editing of a slide bar value) or
within pull-down lists. In these cases, E
Arrow Keys
Use the L /R
EFT
list without having to first scroll through options or navigate within a menu, pull-down list or text box.
Lens H and Lens V
When adjusting the image for focus, zoom or horizontal and vertical positioning, use the specific arrow keys
/R A
EFT IGHT
(L
to indicate the type of adjustment taking place. For example,
• Use the F
OCUS
• Use the Z
OOM
• Use the L
ENS
• Use the L
ENS
Press E
XIT
to return to a presentation level.
NOTE: Use the L
if using the arrow keys related to "Lens V" or "Lens H" on the Remote Keypad. All 4 lens settings can be
adjusted by using the soft keys.
Laser
Press L
ASER
to activate the laser pointer on the remote. Point the remote
at the screen to highlight an area of your presentation.
NOTE: Leave batteries in the wired remote keypad for the L
work.
3.2

Navigating the Menus

3.2.1 Main Menu

Most of the projector controls are accessed from
within the menu system. There are several groups of
related functions, with each group selectable from the
Main menu as shown. Press M
display this Main menu.
On the remote keypad, enter the number that
corresponds to the function menu you wish to access,
such as 2 for the Image Settings menu. Or use the U
D A
OWN RROW
desired option, then press E
function menu or pull-down list of further options will appear.
M Series User Manual
020-100009-08 Rev. 1 (05-2013)
A K
IGHT RROW EY
to change a slide bar value or to select a different option within a pull-down
K or U /D
RROW EY P OWN
and the L A
EFT RROW
and the L A
EFT RROW
H and the L A
EFT RROW
V and the U A or D
P RROW
key (built-in keypad) with the general U
ENS
ENU
at any time to
K
EY
on any keypad to highlight the
NTER
. The corresponding
XIT
acts as a "cancel".
A K
RROW EY
) related to each function. A small window will appear
or R A K
IGHT RROW EY
to improve image clarity as desired.
or R A K
IGHT RROW EY
to achieve a desired image size.
or R A K
IGHT RROW EY
A K
OWN RROW EY
to position the image vertically.
P
ASER
/
P
to position the image horizontally.
/D A K
OWN RROW EY
to get the same effect as
key to
Section 3: Operation
3-9