Section 2: Basic Operation
2.10 USING THE WEB USER INTERFACE
NOTES: 1) Sample menus are shown throughout this section - text and/or icons may vary according to
settings recorded in the password-protected menus. 2) This section outlines the menus available ONLY
through the web ui. These options/features are not available via the CDP.
In addition to using the CDP, most projector functions can be controlled remotely, typically at a
controller such as a PC, via a web user interface on an Ethernet network. If you are on a segregated
network (isolated network), performance is significantly optimized if HTTP is used instead of HTTPS
(SSL) when connecting the web browser to the projector. Use HTTPS (SSL) when there are concerns
about network security. If using HTTPS (SSL), it is essential Internet Explorer 7 is used as the web
browser since it has significant performance improvements over Internet Explorer 6 when handling
SSL connections.
2.11 MAIN MENU
A
Additional Sources
B
Icon for Current Setup
C
Source Buttons
D
Level 1 Menus
E
Current Projector Display
F
Drop-down List Icon
G
Real Time Clock
H
Log Out
2-16
F
2-9 M
IGURE
(64 sources total)
(Selected source is highlighted)
M
AIN
ENU
I
Status Indicator
J
Power ON/OFF
K
Lamp ON/OFF
L
Douser OPEN/CLOSE
M
Display Selected Test Patterns
N
Move Auxiliary Lens IN/OUT
O
Enable/Adjust Intelligent Lens System (ILS)
CP2000-M/MR Setup Guide
020-100205-03 Rev. 1 (05/09)