Main Menu - Christie L2K1500 User Manual

For detailed functions of each menu, see "Menu Tree" on pages 83-85.

Main Menu

q
w
e
r
t
y
u
i
o
q Input
Used to select an input source (Input 1, Input 2, Input 3, or Input 4) (p.33-35).
w PC adjust
Used to adjust the parameters to match with the input signal format (pp.37-39).
e Image select
For computer source, used to select an image level among Dynamic, Standard, Real, and Image 1-10 (p.40).
For Video source, used to select an image level among Dynamic, Standard, Cinema, and Image 1-10 (p.48).
r Image adjust
For computer source, used to adjust the computer image. [Contrast/Brightness/Color management/Color temp./
White balance (R/G/B)/Offset(R/G/B)/Auto picture control/Advanced color/Sharpness/Gamma/Reset/Store]
(pp.41-43).
For video or HDMI source, used to adjust the video image. [Contrast/Brightness/Color/Tint/Color management/
Color temp./White balance (R/G/B)/Offset (R/G/B)/Auto picture control/Advanced color/Sharpness/Gamma/
Noise Reduction/Progressive/Reset/Store] (pp.49-51).
t Screen
For computer source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/True/Custom/Custom
adj./Digital zoom +/-/Keystone/Ceiling/Rear/Screen aspect/Reset] (pp.44-46).
For video or HDMI source, used to adjust the size of the image. [Normal/Full/Wide(16:9)/Zoom/Natural
wide/Custom/Custom adj./Keystone/Ceiling/Rear/Screen aspect/Reset] (pp. 52-53).
y Setting
Used to set the projector's operating configurations (pp.54-69).
u Information
s
Display the input source information: Input, H-sync freq., V-sync freq., Screen, Lamp mode, Lamp control, Lamp
interval, Lamp 1, Lamp 2, Lamp 3, Lamp 4, Language, Filter counter, Power management, Key lock, PIN code
lock, Shutter management, Remote control, SERIAL NO. and Option control No. (p.30).
i Network
See the user's manual of "Network Set-up and Operation" .
o Guide
The key operation is displayed.
L2K1500 User Manual
020-000387-01 Rev.1 (05-2011)
Main Menu
Sub-Menu
Basic Operation
27