Displaying Information For Dynamic Ip Source Guard Bindings; Figure 3-76 Static Ip Source Guard Binding Configuration - Samsung iES4028F Management Manual

3
Configuring the Switch
Web – Click IP Source Guard, Static Configuration. Select the VLAN and port to
which the entry will be bound, enter the MAC address and associated IP address,
then click Add.
CLI – This example configures a static source-guard binding on port 5
Console(config)#ip source-guard binding 11-22-33-44-55-66 vlan 1
192.168.0.99 interface ethernet 1/5
Console(config)#

Displaying Information for Dynamic IP Source Guard Bindings

Use the Dynamic Information page to display the source-guard binding table for a
selected interface.
Command Attributes
• Query by – Select an interface to display the source-guard binding. (Options: Port,
VLAN, MAC Address, or IP Address)
• Dynamic Binding Table Counts – Displays the number of IP addresses in the
source-guard binding table.
• Current Dynamic Binding Table – Displays the IP addresses in the source-guard
binding table.
3-126

Figure 3-76 Static IP Source Guard Binding Configuration

.
4-175