4
Command Line Interface
Command Usage
• In some countries or regions, clocks are adjusted through the summer months
so that afternoons have more daylight and mornings have less. This is known
as Summer Time, or Daylight Savings Time (DST). Typically, clocks are
adjusted forward one hour at the start of spring and then adjusted backward
in autumn.
• This command sets the summer-time time relative to the configured time
zone. To specify the time corresponding to your local time when summer-time
is in effect, select the predefined summer-time time zone appropriate for your
location, or manually configure summer-time if these predefined
configurations do not apply to your location (see clock summer-time (date)
on page 4-68 or clock summer-time (recurring) on page 4-70).
Region
Start Time, Day, Week, & Month
Australia
00:00:00, Sunday, Week 5 of October 23:59:59, Sunday, Week 5 of March
Europe
00:00:00, Sunday, Week 5 of March
New Zealand 00:00:00, Sunday, Week 1 of October 23:59:59, Sunday, Week 3 of March
USA
02:00:00, Sunday, Week 2 of March
Example
Console(config)#clock summer-time MESZ predefined europe
Console(config)#
Related Commands
show sntp (4-62)
clock summer-time (recurring)
This command allows the user to manually configure the start, end, and offset times
of summer-time (daylight savings time) for the switch on a recurring basis. Use the
no form to disable summer-time.
Syntax
clock summer-time name recurring b-week b-day b-month b-hour b-minute
e-week e-day e-month e-hour e-minute offset
no clock summer-time
• name - Name of the timezone while summer time is in effect, usually an
acronym. (Range: 1-30 characters)
• b-week - The week of the month when summer-time will begin. (Range: 1-5)
• b-day - The day of the week when summer-time will begin. (Options:
sunday | monday | tuesday | wednesday | thursday | friday | saturday)
• b-month - The month when summer-time will begin. (Options: january |
february | march | april | may | june | july | august | september | october
| november | december)
4-70
Table 4-20 Predefined Summer-Time Parameters
End Time, Day, Week, & Month
23:59:59, Sunday, Week 5 of October
02:00:00, Sunday, Week 1 of November
Rel. Offset
60 min
60 min
60 min
60 min
Need help?
Do you have a question about the iES4028F and is the answer not in the manual?
Questions and answers