CLI – This example displays all entries currently in the secure MAC address table.
Console#show network-access mac-address-table
---- ----------------- --------------- --------- -------------------------
Port MAC-Address
---- ----------------- --------------- --------- -------------------------
1/1
00-00-01-02-03-04 172.155.120.17
1/1
00-00-01-02-03-05 172.155.120.17
1/1
00-00-01-02-03-06 172.155.120.17
1/3
00-00-01-02-03-07 172.155.120.17
Console#
MAC Authentication
Each port's MAC authentication settings are configured independently.
Configuring MAC authentication parameters for ports
Use the MAC Authentication Port Configuration page to designate MAC
authentication maximum MAC counts and the intrusion action for each port.
Command Attributes
• Port – Indicates the port being configured.
• Status – Indicates whether MAC Authentication is enabled or disabled for the port.
See "Configuring MAC Authentication for Ports" on page 3-104. The following
parameters are unavailable for modification if MAC Authentication is not enabled
for the port.
• Max MAC Count – The maximum allowed amount of MAC authenticated MAC
addresses on the port. (Default: 1024; Range: 1-1024)
• Intrusion Action – The switch can respond in two ways to an intrusion.
- Block Traffic – All traffic for the unauthenticated host is blocked.
- Pass Traffic – All traffic for the unauthenticated host is allowed.
• Trunk – Indicates if the port is a trunk member.
RADIUS-Server
Attribute Time
Static
Dynamic
Static
Dynamic
General Security Measures
00d06h32m50s
00d06h33m20s
00d06h35m10s
00d06h34m20s
3
4-158
3-107