3
Configuring the Switch
Web – Click VLAN, Private VLAN, Information. Select the desired port from the
VLAN ID drop-down menu.
CLI – This example shows the switch configured with primary VLAN 5 and
secondary VLAN 6. Port 3 has been configured as a promiscuous port and mapped
to VLAN 5, while ports 4 and 5 have been configured as a host ports and are
associated with VLAN 6. This means that traffic for port 4 and 5 can only pass
through port 3.
Console#show vlan private-vlan
Primary
Secondary
--------
-----------
5
5
Console#
Configuring Private VLANs
The Private VLAN Configuration page is used to create/remove primary or
community VLANs.
Command Attributes
• VLAN ID – ID of configured VLAN (2-4094).
• Type – There are two types of private VLANs:
- Primary VLANs – Conveys traffic between promiscuous ports, and to
community ports within secondary (or community) VLANs.
- Community VLANs - Conveys traffic between community ports, and to their
promiscuous ports in the associated primary VLAN.
• Current – Displays a list of the currently configured VLANs.
3-210
Figure 3-117 Private VLAN Information
Type
----------
primary
6
community
Interfaces
--------------------------------------
Eth1/ 3
Eth1/ 4 Eth1/ 5
4-262