Show Protocol-Vlan Protocol-Group-Vid; Configuring Voice Vlans - Samsung iES4028F Management Manual

show protocol-vlan protocol-group-vid

This command shows the mapping from protocol groups to VLANs.
Syntax
show protocol-vlan protocol-group-vid
Default Setting
The mapping for all protocol groups is displayed.
Command Mode
Privileged Exec
Example
This shows that traffic matching the specifications for protocol group 2 will be
mapped to VLAN 2:
Console#show protocol-vlan protocol-group-vid
ProtocolGroup ID
------------------ -----------
2
Console#

Configuring Voice VLANs

The switch allows you to specify a Voice VLAN for the network and set a CoS priority
for the VoIP traffic. VoIP traffic can be detected on switch ports by using the source
MAC address of packets, or by using LLDP (IEEE 802.1AB) to discover connected
VoIP devices. When VoIP traffic is detected on a configured port, the switch
automatically assigns the port to the Voice VLAN. Alternatively, switch ports can be
manually configured.
Command
voice vlan
voice vlan aging
voice vlan mac-address
switchport voice vlan
switchport voice vlan rule
switchport voice vlan security Enables Voice VLAN security on ports
switchport voice vlan priority
show voice vlan
VLAN ID
VLAN2
Table 4-78 Voice VLAN Commands
Function
Defines the Voice VLAN ID
Configures the aging time for Voice VLAN ports
Configures VoIP device MAC addresses
Sets the Voice VLAN port mode
Sets the automatic VoIP traffic detection method for ports IC
Sets the VoIP traffic priority for ports
Displays Voice VLAN settings
4
VLAN Commands
Mode Page
GC 4-280
GC 4-280
GC 4-281
IC 4-282
4-283
IC 4-283
IC 4-284
PE 4-285
4-279