Server - Samsung iES4028F Management Manual

Example
Console(config)#aaa group server radius tps
Console(config-sg-radius)#

server

This command adds a security server to an AAA server group. Use the no form to
remove the associated server from the group.
Syntax
[no] server {index | ip-address}
• index - Specifies a server index and the sequence to use for the group.
(Range: RADIUS 1-5, TACACS+ 1)
• ip-address - Specifies the host IP address of a server.
Default Setting
None
Command Mode
Server Group Configuration
Command Usage
• When specifying the index for a RADIUS server, that server index must
already be defined by the radius-server host command (see page 4-105).
• When specifying the index for a TACACS+ server, that server index must
already be defined by the tacacs-server host command (see page 4-110).
Example
Console(config)#aaa group server radius tps
Console(config-sg-radius)#server 10.2.68.120
Console(config-sg-radius)#
Authentication Commands
4
4-115