Table 4-6 System Management Commands
Command Group
Web Server
Telnet Server
Secure Shell
Device Designation Commands
Command
prompt
hostname
snmp-server contact
snmp-server location
hostname
This command specifies or modifies the host name for this device. Use the no form
to restore the default host name.
Syntax
hostname name
no hostname
name - The name of this host. (Maximum length: 255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#hostname RD#1
Console(config)#
Function
Enables management access via a web browser
Enables management access via Telnet
Provides secure replacement for Telnet
Table 4-7 Device Designation Commands
Function
Customizes the prompt used in PE and NE mode
Specifies the host name for the switch
Sets the system contact string
Sets the system location string
System Management Commands
(Continued)
4
Page
4-123
4-126
4-127
Mode
Page
GC
4-14
GC
4-17
GC
4-88
GC
4-89
4-17