Configuring Interface Connections - Samsung iES4028F Management Manual

Table of Contents

Advertisement

3
Configuring the Switch
Current Status:
• Link Status – Indicates if the link is up or down.
• Port Operation Status – Provides detailed information on port state.
(Displayed only when the link is up.)
• Operation Speed-duplex – Shows the current speed and duplex mode.
• Flow Control Type – Indicates the type of flow control currently in use.
(IEEE 802.3x, Back-Pressure or none)
CLI – This example shows the connection status for Port 5.
Console#show interfaces status ethernet 1/5
Information of Eth 1/5
Basic Information:
Port Type:
Mac Address:
Configuration:
Name:
Port Admin:
Speed-duplex:
Capabilities:
Broadcast Storm:
Broadcast Storm Limit:
Multicast Storm:
Multicast Storm Limit:
UnknownUnicast Storm:
UnknownUnicast Storm Limit:
Flow Control:
LACP:
Port Security:
Max MAC Count:
Port Security Action:
Media Type:
Giga PHY mode: Auto preferred master
Current Status:
Link Status:
Operation Speed-duplex: 10half
Flow Control Type:
Console#

Configuring Interface Connections

You can use the Port Configuration or Trunk Configuration page to enable/disable an
interface, set auto-negotiation and the interface capabilities to advertise, or manually
fix the speed, duplex mode, and flow control.
Command Usage
• Auto-negotiation must be disabled before you can configure or force the interface
to use the Speed/Duplex Mode or Flow Control options.
• When using auto-negotiation, the optimal settings will be negotiated between the
link partners based on their advertised capabilities. To set the speed, duplex mode,
or flow control under auto-negotiation, the required operation modes must be
specified in the capabilities list for an interface.
• The 1000BASE-T standard does not support forced mode. Auto-negotiation
should always be used to establish a connection over any 1000BASE-T port or
3-130
100TX
00-16-B6-F0-71-41
Up
Auto
10half, 10full, 100half, 100full
Enabled
64 Kbits/second
Disabled
64 Kbits/second
Disabled
64 Kbits/second
Disabled
Disabled
Disabled
0
None
None
Down
None
4-197

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ies4028fpIes4024gp

Table of Contents