Enabling Snmp Agent Status; Figure 3-23 Enabling Snmp Agent Status - Samsung iES4028F Management Manual

Model Level
v1 noAuthNoPriv public
v1 noAuthNoPriv private
v1 noAuthNoPriv user defined user defined user defined user defined Community string only
v2c noAuthNoPriv public
v2c noAuthNoPriv private
v2c noAuthNoPriv user defined user defined user defined user defined Community string only
v3 noAuthNoPriv user defined user defined user defined user defined A user name match only
v3 AuthNoPriv
v3 AuthPriv
Note:
The predefined default groups and view can be deleted from the system. You can
then define customized groups and views for the SNMP clients that require access.

Enabling SNMP Agent Status

Enables SNMPv3 service for all management clients (i.e., versions 1, 2c, 3).
Command Attributes
SNMP Agent Status – Check the box to enable or disable the SNMP Agent.
Web – Click SNMP, Agent Status.
CLI – The following example enables SNMP on the switch.
Console(config)#snmp-server
Console(config)#
Table 3-4 SNMPv3 Security Models and Levels
Group Read View
defaultview
(read only)
defaultview
(read/write)
defaultview
(read only)
defaultview
(read/write)
user defined user defined user defined user defined Provides user
user defined user defined user defined user defined Provides user

Figure 3-23 Enabling SNMP Agent Status

Simple Network Management Protocol
Write View Notify View Security
none none
defaultview none
none none
defaultview none
3
Community string only
Community string only
Community string only
Community string only
authentication via MD5 or
SHA algorithms
authentication via MD5 or
SHA algorithms and data
privacy using DES 56-bit
encryption
4-86
3-41