Authentication Commands; User Account Commands; Table 4-28 Authentication Commands; Table 4-29 User Access Commands - Samsung iES4028F Management Manual

4
Command Line Interface
Field
EngineId
User Name
Authentication Protocol
Privacy Protocol
Storage Type
Row Status
SNMP remote user

Authentication Commands

You can configure this switch to authenticate users logging into the system for
management access using local or RADIUS authentication methods. You can also
enable port-based authentication for network client access using IEEE 802.1X.
Command Group
User Accounts
Authentication Sequence
RADIUS Client
TACACS+ Client
AAA
Web Server
Telnet Server
Secure Shell
Port Authentication
Management IP Filter

User Account Commands

The basic commands required for management access are listed in this section.
This switch also includes other options for password checking via the console or a
Telnet connection (page 4-40), user authentication via a remote authentication
server (page 4-100), and host access authentication for specific ports (page 4-137).
Command
username
enable password
4-100

Table 4-27 show snmp user - display description

Description
String identifying the engine ID.
Name of user connecting to the SNMP agent.
The authentication protocol used with SNMPv3.
The privacy protocol used with SNMPv3.
The storage type for this entry.
The row status of this entry.
A user associated with an SNMP engine on a remote device.

Table 4-28 Authentication Commands

Function
Configures the basic user names and passwords for management
access
Defines logon authentication method and precedence
Configures settings for authentication via a RADIUS server
Configures settings for authentication via a TACACS+ server
Configures authentication, authorization, and accounting for
network access
Enables management access via a web browser
Enables management access via Telnet
Provides secure replacement for Telnet
Configures host authentication on specific ports using 802.1X
Configures IP addresses that are allowed management access

Table 4-29 User Access Commands

Function
Establishes a user name-based authentication system at login
Sets a password to control access to the Privileged Exec level
Page
4-100
4-103
4-105
4-109
4-114
4-123
4-126
4-127
4-137
4-146
Mode Page
GC 4-101
GC 4-102