Downloading System Software From A Server; Figure 3-9 Copy Firmware; Figure 3-10 Deleting Files - Samsung iES4028F Management Manual

3
Configuring the Switch

Downloading System Software from a Server

When downloading runtime code, the new operation code file will overwrite the
existing file.
Versions of the code prior to 1.1.0.10 require the operation code file being
transferred to have the same destination file name as the existing code file for the transfer
to succeed.
Web –Click System, File Management, Copy Operation. Select "tftp to file" as the file
transfer method, enter the IP address of the TFTP server, set the file type to
"opcode," enter the file name of the software to download, select a file on the switch
to overwrite or specify a new file name, then click Apply. If you replaced the current
firmware used for startup and want to start using the new operation code, reboot the
system via the System/Reset menu.

Figure 3-9 Copy Firmware

The new file is automatically set as the startup code since the switch only supports
the presence of one firmware file. After the transfer is complete, restart the system
for the new code to take effect.
To delete a file, select System, File, Delete. Select the file name from the given list
by checking the tick box and click Apply. Note that t
he file currently designated as the
startup code cannot be deleted.

Figure 3-10 Deleting Files

3-22