aaa accounting update
This command enables the sending of periodic updates to the accounting server.
Use the no form to disable accounting updates.
Syntax
aaa accounting update [periodic interval]
no aaa accounting update
interval - Sends an interim accounting record to the server at this interval.
(Range: 1-2147483647 minutes)
Default Setting
1 minute
Command Mode
Global Configuration
Command Usage
• When accounting updates are enabled, the switch issues periodic interim
accounting records for all users on the system.
• Using the command without specifying an interim interval enables updates,
but does not change the current interval setting.
Example
Console(config)#aaa accounting update periodic 30
Console(config)#
accounting dot1x
This command applies an accounting method for 802.1X service requests on an
interface. Use the no form to disable accounting on the interface.
Syntax
accounting dot1x {default | list-name}
no accounting dot1x
• default - Specifies the default method list created with the aaa accounting
dot1x command (page 4-116).
• list-name - Specifies a method list created with the aaa accounting dot1x
command.
Default Setting
None
Command Mode
Interface Configuration
Authentication Commands
4
4-119