Web – Click VLAN, Private VLAN, Configuration. Enter the VLAN ID number, select
Primary or Community type, then click Add. To remove a private VLAN from the
switch, highlight an entry in the Current list box and then click Remove. Note that all
member ports must be removed from the VLAN before it can be deleted.
CLI – This example configures VLAN 5 as a primary VLAN, and VLAN 6 as a
community VLAN.
Console(config)#vlan database
Console(config-vlan)#private-vlan 5 primary
Console(config-vlan)#private-vlan 6 community
Console(config-vlan)#
Associating VLANs
Each community VLAN must be associated with a primary VLAN.
Command Attributes
• Primary VLAN ID – ID of primary VLAN (2-4094).
• Association – Community VLANs associated with the selected primary VLAN.
• Non-Association – Community VLANs not associated with the selected VLAN.
Web – Click VLAN, Private VLAN, Association. Select the required primary VLAN
from the scroll-down box, highlight one or more community VLANs in the
Non-Association list box, and click Add to associate these entries with the selected
primary VLAN. (A community VLAN can only be associated with one primary VLAN.)
Figure 3-118 Private VLAN Configuration
Figure 3-119 Private VLAN Association
VLAN Configuration
4-254
4-272
3-211
3