Show Interfaces Counters - Samsung iES4028F Management Manual

4
Command Line Interface
Example
Console#show interfaces status ethernet 1/5
Information of Eth 1/5
Basic information:
Port type:
Mac address:
Configuration:
Name:
Port admin:
Speed-duplex:
Capabilities:
Broadcast storm:
Broadcast storm limit:
Multicast Storm:
Multicast Storm Limit:
UnknownUnicast Storm:
UnknownUnicast Storm Limit:
Flow control:
LACP:
Port Security:
Max MAC count:
Port Security Action:
Media Type:
Giga PHY mode: Auto preferred master
Current status:
Link status:
Port operation status:
Operation speed-duplex: 100full
Flow control type:
Console#show interfaces status vlan 1
Information of VLAN 1
MAC address:
Console#

show interfaces counters

This command displays interface statistics.
Syntax
show interfaces counters [interface]
interface
• ethernet unit/port
- unit - Stack unit. (Range: 1)
- port - Port number.
(Range: 1-28 on iES4028F/iES4028FP, 1-24 on iES4024GP)
• port-channel channel-id (Range: 1-8)
Default Setting
Shows the counters for all interfaces.
Command Mode
Normal Exec, Privileged Exec
4-198
100TX
00-12-CF-12-34-61
Up
Auto
10half, 10full, 100half, 100full,
Enabled
64 Kbits/second
Disabled
64 Kbits/second
Disabled
64 Kbits/second
Disabled
Disabled
Disabled
0
None
None
Up
Up
None
00-12-CF-12-34-56