Show Network-Access Mac-Address-Table - Samsung iES4028F Management Manual

4
Command Line Interface

show network-access mac-address-table

Use this command to display secure MAC address table entries.
Syntax
show network-access mac-address-table [static | dynamic]
[address mac-address [mask]] [interface interface] [sort {address |
interface}]
• static - Specifies static address entries.
• dynamic - Specifies dynamic address entries.
• mac-address - Specifies a MAC address entry. (Format: xx-xx-xx-xx-xx-xx)
• mask - Specifies a MAC address bit mask for filtering displayed addresses.
• interface - Specifies a port interface.
• ethernet unit/port
- unit - This is unit 1.
- port - Port number.
(Range: 1-28 on iES4028F/iES4028FP, 1-24 on iES4024GP)
• sort - Sorts displayed entries by either MAC address or interface.
Default Setting
Displays all filters.
Command Mode
Privileged Exec
Command Usage
When using a bit mask to filter displayed MAC addresses, a 1 means "care"
and a 0 means "don't care". For example, a MAC of 00-00-01-02-03-04 and
mask FF-FF-FF-00-00-00 would result in all MACs in the range
00-00-01-00-00-00 to 00-00-01-FF-FF-FF to be displayed. All other MACs
would be filtered out.
Example
Console#show network-access mac-address-table
---- ----------------- --------------- --------- -------------------------
Port MAC-Address
---- ----------------- --------------- --------- -------------------------
1/1 00-00-01-02-03-04 172.155.120.17
1/1 00-00-01-02-03-05 172.155.120.17
1/1 00-00-01-02-03-06 172.155.120.17
1/3 00-00-01-02-03-07 172.155.120.17
Console#
4-158
RADIUS-Server Attribute Time
Static
Dynamic
Static
Dynamic
00d06h32m50s
00d06h33m20s
00d06h35m10s
00d06h34m20s