Banner Configure Department; Banner Configure Equipment-Info - Samsung iES4028F Management Manual

banner configure department

This command is used to configure the department information displayed in the
banner. Use the no form to restore the default setting.
Syntax
banner configure department dept-name
no banner configure company
dept-name - The name of the department.
(Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure department
command interprets spaces as data input boundaries. The use of underscores
( _ ) or other unobtrusive non-letter characters is suggested for situations
where white space is necessary for clarity.
Example
Console(config)#banner configure department R&D
Console(config)#

banner configure equipment-info

This command is used to configure the equipment information displayed in the
banner. Use the no form to restore the default setting.
Syntax
banner configure equipment-info manufacturer-id mfr-id floor floor-id
row row-id rack rack-id shelf-rack sr-id manufacturer mfr-name
no banner configure equipment-info [floor | manufacturer |
manufacturer-id | rack | row | shelf-rack]
• mfr-id - The name of the device model number.
• floor-id - The floor number.
• row-id - The row number.
• rack-id - The rack number.
• sr-id - The shelf number in the rack.
• mfr-name - The name of the device manufacturer.
Maximum length of each parameter: 32 characters
Default Setting
None
System Management Commands
4
4-21