Figure 3-73 Dhcp Snooping Port Configuration - Samsung iES4028F Management Manual

Command Attributes
• Trust Status – Enables or disables port as trusted.
Web – Click DHCP Snooping, Information Option Configuration.
CLI – This example shows how to enable the DHCP Snooping Trust Status for ports
Console(config)#interface ethernet 1/5
Console(config-if)#ip dhcp snooping trust
Console(config-if)#end
Console#show ip dhcp snooping
Global DHCP Snooping status: disable
DHCP Snooping Information Option Status: disable
DHCP Snooping Information Policy: replace
DHCP Snooping is configured on the following VLANs:
Verify Source Mac-Address: enable
Interface
----------
Eth 1/1
Eth 1/2
Eth 1/3
Eth 1/4
Eth 1/5
. .
.

Figure 3-73 DHCP Snooping Port Configuration

Trusted
----------
No
No
No
No
Yes
General Security Measures
3
.
4-167
4-171
3-121