Figure 3-99 Displaying Spanning Tree Information - Samsung iES4028F Management Manual

3
Configuring the Switch
Web – Click Spanning Tree, STA, Information.
CLI – This command displays global STA settings, followed by settings for each port.
Console#show spanning-tree
Spanning-tree information
---------------------------------------------------------------
Spanning Tree Mode:
Spanning Tree Enabled/Disabled:
Instance:
VLANs Configuration:
Priority:
Bridge Hello Time (sec.):
Bridge Max Age (sec.):
Bridge Forward Delay (sec.):
Root Hello Time (sec.):
Root Max Age (sec.):
Root Forward Delay (sec.):
Max Hops:
Remaining Hops:
Designated Root:
Current Root Port:
Current Root Cost:
Number of Topology Changes:
Last Topology Change Time (sec.): 4738
Transmission Limit:
Path Cost Method:
Flooding Behavior:
. .
.
Note:
The current root port and current root cost display as zero when this device is not
connected to the network.
3-170

Figure 3-99 Displaying Spanning Tree Information

RSTP
Enabled
0
1-4094
32768
2
20
15
2
20
15
20
20
32768.0013F7D37E60
54
5000
12
3
Long
To VLAN
4-246