Show Cluster Members; Show Cluster Candidates; Upnp Commands - Samsung iES4028F Management Manual

show cluster members

This command shows the current switch cluster members.
Command Mode
Privileged Exec
Example
Console#show cluster members
Cluster Members:
ID: 1
Role: Active member
IP Address: 10.254.254.2
MAC Address: 00-12-cf-23-49-c0
Description: Ubigate iES4024GP Switch
Console#

show cluster candidates

This command shows the discovered Candidate switches in the network.
Command Mode
Privileged Exec
Example
Console#show cluster candidates
Cluster Candidates:
Role Mac
--------------- ----------------- -----------------------------------------
ACTIVE MEMBER 00-12-cf-23-49-c0 Ubigate iES4024GP Switch
CANDIDATE 00-12-cf-0b-47-a0 Ubigate iES4024GP Switch
Console#

UPnP Commands

Universal Plug and Play (UPnP) is a set of protocols that allows devices to connect
seamlessly and simplifies the deployment of home and office networks. UPnP
achieves this by issuing UPnP device control protocols designed upon open,
Internet-based communication standards.
The commands described in this section allow the switch to advertise itself as a
UPnP compliant device. When discovered by a host device, basic information about
this switch can be displayed, and the web management interface accessed.
Note:
UPnP is currently only supported by this switch for Windows Vista, but will
supported for Windows XP in future releases.
Command
upnp device
upnp device ttl
upnp device advertise
duration
show upnp
Description
Table 4-1 UPnP Commands
Function
Enables/disables UPnP on the network
Sets the time-to-live (TTL) value.
Sets the advertisement duration of the device
Displays UPnP status and parameters
System Management Commands
Mode
GC
GC
GC
PE
4
Page
4-78
4-78
4-79
4-79
4-77