Show Snmp Engine-Id; Snmp-Server View; Table 4-24 Show Snmp Engine-Id - Display Description - Samsung iES4028F Management Manual

4
Command Line Interface
Related Commands
snmp-server host (4-90)

show snmp engine-id

This command shows the SNMP engine ID.
Command Mode
Privileged Exec
Example
This example shows the default engine ID.
Console#show snmp engine-id
Local SNMP engineID: 8000002a8000000000e8666672
Local SNMP engineBoots: 1
Remote SNMP engineID
80000000030004e2b316c54321
Console#
Field
Local SNMP engineID
Local SNMP engineBoots The number of times that the engine has (re-)initialized since the snmp EngineID
Remote SNMP engineID
IP address

snmp-server view

This command adds an SNMP view which controls user access to the MIB. Use the
no form to remove an SNMP view.
Syntax
snmp-server view view-name oid-tree {included | excluded}
no snmp-server view view-name
• view-name - Name of an SNMP view. (Range: 1-64 characters)
• oid-tree - Object identifier of a branch within the MIB tree. Wild cards can
be used to mask a specific portion of the OID string. (Refer to the
examples.)
• included - Defines an included view.
• excluded - Defines an excluded view.
Default Setting
defaultview (includes access to the entire MIB tree)
Command Mode
Global Configuration
4-94

Table 4-24 show snmp engine-id - display description

Description
String identifying the engine ID.
was last configured.
String identifying an engine ID on a remote device.
IP address of the device containing the corresponding remote SNMP engine.
IP address
192.168.1.19