Figure 3-151 Igmp Filter And Throttling Port Configuration - Samsung iES4028F Management Manual

3
Configuring the Switch
Web – Click IGMP Snooping, IGMP Filter/Throttling Port Configuration or IGMP
Filter/Throttling Trunk Configuration. Select a profile to assign to an interface, then
set the throttling number and action. Click Apply.
CLI – This example assigns IGMP profile number 19 to port 1, and then sets the
throttling number and action. The current IGMP filtering and throttling settings for the
interface are then displayed.
Console(config)#interface ethernet 1/1
Console(config-if)#ip igmp filter 19
Console(config-if)#ip igmp max-groups 64
Console(config-if)#ip igmp max-groups action deny
Console(config-if)#end
Console#show ip igmp filter interface ethernet 1/1
Information of Eth 1/1
IGMP Profile 19
permit
range 239.1.2.3 239.1.2.3
range 239.2.3.1 239.2.3.200
Console#show ip igmp throttle interface ethernet 1/1
Information of Eth 1/1
status : TRUE
action : deny
max multicast groups : 64
current multicast groups: 0
Console#
3-264

Figure 3-151 IGMP Filter and Throttling Port Configuration

4-188
4-337
4-338
4-338
4-339
4-340