Chapter 1: Introduction; Table 1-1 Differences In Switch Models - Samsung iES4028F Management Manual

Chapter 1: Introduction

This switch provides a broad range of features for Layer 2 switching. It includes a
management agent that allows you to configure the features listed in this manual.
The default configuration can be used for most of the features provided by this
switch. However, there are many options that you should configure to maximize the
switch's performance for your particular network environment.
The RJ-45 ports on the Ubigate IES2028FP and iES4024GP switch also support the
IEEE 802.3af Power-over-Ethernet (PoE) standard that enables DC power to be
supplied to attached devices over the connecting Ethernet cable.
This guide describes device management for the Ubigate iES4028F, iES4028FP,
and iES4024GP. The only significant differences between these switches are listed
in the following table.
Ports
Power over Ethernet
Traffic Segmentation
Dual Image Download Supported (page 3-21)

Table 1-1 Differences in Switch Models

Ubigate iES4028F
24 Fast Ethernet,
4 Gigabit Ethernet/SFP
Not supported
Supported (page 3-206)
Ubigate iES4028FP
24 Fast Ethernet,
2 Gigabit Ethernet,
2 Gigabit Ethernet/SFP
Supported on
RJ-45 Ports 1-24
Supported
Not supported
Ubigate iES4024GP
22 Gigabit Ethernet,
2 Gigabit Ethernet/SFP
Supported on
RJ-45 Ports 1-24
Not supported
Not supported
1-1