Show Sntp; Ntp Client - Samsung iES4028F Management Manual

4
Command Line Interface
Example
Console(config)#sntp poll 60
Console(config)#
Related Commands
sntp client (4-60)

show sntp

This command displays the current time and configuration settings for the SNTP
client, and indicates whether or not the local time has been properly updated.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the current time, the poll interval used for sending
time synchronization requests, and the current SNTP mode (i.e., unicast).
Example
Console#show sntp
Current time:
Poll interval: 16
Current mode:
SNTP status : Enabled
SNTP server 137.92.140.80 0.0.0.0 0.0.0.0
Current server: 137.92.140.80
Console#

ntp client

This command enables NTP client requests for time synchronization from NTP time
servers specified with the ntp servers command. Use the no form to disable NTP
client requests.
Syntax
[no] ntp client
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• SNTP and NTP clients cannot be enabled at the same time. First disable the
SNTP client before using this command.
• The time acquired from time servers is used to record accurate dates and
times for log events. Without NTP, the switch only records the time starting
from the factory default set at the last bootup (i.e., 00:00:00, Jan. 1, 2001).
4-62
Dec 23 05:13:28 2002
unicast