Samsung iES4028F Management Manual page 232

3
Configuring the Switch
• Designated Port – The port priority and number of the port on the designated
bridging device through which this switch must communicate with the root of the
Spanning Tree.
• Oper Link Type – The operational point-to-point status of the LAN segment
attached to this interface. This parameter is determined by manual configuration or
by auto-detection, as described for Admin Link Type in STA Port Configuration on
page 3-178.
• Oper Edge Port – This parameter is initialized to the setting for Admin Edge Port
in STA Port Configuration on page 3-178 (i.e., true or false), but will be set to false
if a BPDU is received, indicating that another bridge is attached to this port.
• Port Role – Roles are assigned according to whether the port is part of the active
topology connecting the bridge to the root bridge (i.e., root port), connecting a LAN
through the bridge to the root bridge (i.e., designated port), or is the MSTI regional
root (i.e., master port); or is an alternate or backup port that may provide
connectivity if other bridges, bridge ports, or LANs fail or are removed. The role is
set to disabled (i.e., disabled port) if a port has no role within the spanning tree.
Alternate port receives more
useful BPDUs from another
bridge and is therefore not
selected as the designated
port.
• Trunk Member – Indicates if a port is a member of a trunk.
(STA Port Information only)
These additional parameters are only displayed for the CLI:
• Admin Status – Shows if this interface is enabled.
• External Admin Path Cost – The path cost for the IST. This parameter is used
by the STA to determine the best path between devices. Therefore, lower values
3-176
R
A
x
R
A D
x
R: Root Port
A: Alternate Port
D: Designated Port
B: Backup Port
R
D B
Backup port receives more
useful BPDUs from the same
bridge and is therefore not
selected as the designated
port.
R
B