Samsung iES4028F Management Manual page 109

Table 3-5 Supported Notification Messages (Continued)
Object Label Object ID
1.3.6.1.6.3.1.1.5.3
*
linkDown
1.3.6.1.6.3.1.1.5.4
*
linkUp
1.3.6.1.6.3.1.1.5.5
*
authenticationFailure
RMON Events (V2)
risingAlarm 1.3.6.1.2.1.16.0.1
fallingAlarm 1.3.6.1.2.1.16.0.2
†
Private Traps
swPowerStatus 1.3.6.1.4.1.236.4.1.12.1.103.2.1.0.1
ChangeTrap
swIpFilterRejectTrap 1.3.6.1.4.1.236.4.1.12.1.103.2.1.0.40
pethPsePortOnOff 1.3.6.1.4.1.236.4.1.12.1.103.173.2.1.0.43 This notification indicates if a PSE (Power
Notification
pethPsePortPower 1.3.6.1.4.1.236.4.1.12.1.103.173.2.1.0.44 This notification indicates a Port Change
MaintenanceStatus
Notification
Simple Network Management Protocol
Description
A linkDown trap signifies that the SNMP
entity, acting in an agent role, has
detected that the ifOperStatus object for
one of its communication links is about to
enter the down state from some other
state (but not from the notPresent state).
This other state is indicated by the
included value of ifOperStatus.
A linkUp trap signifies that the SNMP
entity, acting in an agent role, has
detected that the ifOperStatus object for
one of its communication links left the
down state and transitioned into some
other state (but not into the notPresent
state). This other state is indicated by the
included value of ifOperStatus.
An authenticationFailure trap signifies
that the SNMPv2 entity, acting in an agent
role, has received a protocol message
that is not properly authenticated. While
all implementations of the SNMPv2 must
be capable of generating this trap, the
snmpEnableAuthenTraps object
indicates whether this trap will be
generated.
The SNMP trap that is generated when
an alarm entry crosses its rising threshold
and generates an event that is configured
for sending SNMP traps.
The SNMP trap that is generated when
an alarm entry crosses its falling
threshold and generates an event that is
configured for sending SNMP traps.
This trap is sent when the power state
changes.
This trap is sent when an incorrect IP
address is rejected by the IP Filter.
Sourcing Equipment) Port is delivering
power to the PD (Powered Device). This
notification is sent on every status change
except in search mode.
Status and is sent on every status
change.
3
3-53