Assigning A Terminal Ip; Authorizing The Terminal Register - Samsung OfficeServ 500 Service Manual

OfficeServ 500 Wireless LAN Service Manual/Ed.00
5.4

Assigning a terminal IP

Before registering a WIP500M terminal, an effective IP address shall be assigned to
the WIP-5000M terminal using the MMC 848 program. This IP address shall be
assigned for each terminal.
Although this IP address may not be relevant when not using the data service, assign
an effective IP address for later use of both voice and data services.
5.5

Authorizing the Terminal Register

A wireless LAN terminal shall be registered at the system DB in order to be used for
the OfficeServ 500 System. After authorizing the terminal register through the MMC
849 program, register the terminal following the registration procedure. The
password used for entering the register authorization menu can be changed through
the MMC 849 program, along with the previous password used for the OfficeServ
500 In addition, the WEP(Wired Equivalent Privacy), an encryption method for the
wireless LAN, is used to maintain data confidentiality in the wireless environment.
Execute the MMC 849 program for authorizing a terminal register in order to register
a terminal to the system. Once the terminal registration is complete, cancel the
register authorization to restrict the registration of other terminals.
© SAMSUNG Electronics Co., Ltd.
MMC Programming
Refer to 'Chapter 5 MMC Programming' of this Description for programming procedures
related to the wireless LAN.
CHAPTER 3. Installation
Page 3-11