Debug Commands; Debug Dot1X; Table 4-22 Debug Commands - Samsung iES4028F Management Manual

4
Command Line Interface

Debug Commands

Command

debug dot1x

debug radius
debug tacacs
debug dot1x
This command configures debug settings for IEEE 802.1X authentication processes.
Use the no form to disable debug mode for IEEE 802.1X.
Syntax
[no] debug dot1x
[all | config | database | event | packet]
[show {all | state-machine [pae | backend]}]
• all - Sets debugging for all options (config, database, event, packet).
• config - Sets debugging for dot1x configuration settings.
• database - Sets debugging for dot1x database operations.
• event - Sets debugging for dot1x events.
• packet - Sets debugging for dot1x packets.
• show - Displays information about the specified debug type.
- all - Displays information for all options.
- state-machine - Displays information on state-machine events.
- backend - Displays information for backend state-machine events.
- pae - Displays information for authenticator state-machine events.
Default Setting
Disabled
Command Mode
Privileged Exec
Command Usage
• Use the debug dot1x command without any classification or feature to enable
debugging for all 802.1X authentication processes.
• Use the debug dot1x all command to enable debugging for all of the
classification options (i.e., config, database, event and packet).
• Use the debug dot1x classification show feature command to enable
debugging for the specified classification and feature. When debugging is
enabled for the config classification, debug messages will be shown when
802.1X configuration commands are entered. When debugging is enabled for
the database classification, debug messages will be shown when a memory
operation is applied to the 802.1X authentication database. When debugging
is enabled for the event classification, debug messages will be shown when
4-80

Table 4-22 Debug Commands

Function
Configures debug settings for IEEE 802.1X
Configures debug settings for RADIUS
Configures debug settings for TACACS
Mode Page
PE 4-80
PE 4-82
PE 4-84