Figure 3-62 Network Access Port Configuration - Samsung iES4028F Management Manual

Note:
MAC authentication cannot be configured on trunk ports. Ports configured as trunk
members are indicated on the Network Access Port Configuration page in the
"Trunk" column.
Web – Click Security, Network Access, Port Configuration.
CLI – This example configures MAC authentication for port 1.
Console(config)#interface ethernet 1/1
Console(config-if)#network-access mode mac-authentication
Console(config-if)#network-access max-mac-count 10
Console(config-if)#mac-authentication max-mac-count 24
Console(config-if)#network-access dynamic-vlan
Console(config-if)#network-access guest-vlan
Console(config-if)#end
Console#show network-access interface ethernet 1/1
Global secure port information
Reauthentication Time
--------------------------------------------------
--------------------------------------------------
Port : 1/1
MAC Authentication
MAC Authentication Intrusion action
MAC Authentication Maximum MAC Counts : 1024
Maximum MAC Counts
Dynamic VLAN Assignment
Guest VLAN
Console#

Figure 3-62 Network Access Port Configuration

General Security Measures
: 1800
: Enabled
: Block traffic
: 2048
: Enabled
: Enabled
3
4-152
4-153
4-155
4-153
4-154
3-105