About This Guide; Related Publications; Revision History - Samsung iES4028F Management Manual

About This Guide

Purpose
This guide gives specific information on how to operate and use the management
functions of the switch.
Audience
The guide is intended for use by network administrators who are responsible for operating
and maintaining network equipment; consequently, it assumes a basic working
knowledge of general switch functions, the Internet Protocol (IP), and Simple Network
Management Protocol (SNMP).
Conventions
The following conventions are used throughout this guide to show information:
Note: Emphasizes important information or calls your attention to related features or
instructions.
Caution: Alerts you to a potential hazard that could cause loss of data, or damage the
system or equipment.
Warning: Alerts you to a potential hazard that could cause personal injury.

Related Publications

The following publication details the hardware features of the switch, including the
physical and performance-related characteristics, and how to install the switch:
The Installation Manual
Also, as part of the switch's software, there is an online web-based help that describes all
management related features.

Revision History

This section summarizes the changes in each revision of this guide.
August 2008 Revision
This is the third revision of this guide. It combines information for the Ubigate iES4028F,
iES4028FP and iES4024GP. This guide is valid for software release v1.1.0.14. Other than
the addition of information about the iES4024GP, it also includes the following updated
and additional information in the indicated tables or sections:
• Table 1-1, "Differences in Switch Models," on page 1-1.
• Single image and dual image support in "Managing Firmware" on page 3-21.
• Access Level attribute in "Configuring User Accounts" on page 3-58.
v