Pressure Adjustment Of Separation Pulley (Reference) - Kyocera KM-6030 Service Manual

2FB/2FC-3

(3) Pressure adjustment of separation pulley (reference)

Perform the following adjustment if no paper feed or multiple sheets of paper occurs for feeding from the cassette.
Caution:
Basically, adjustment is not needed. Perform the adjustment only when a paper feed performance gets worse remarkably
with the paper type.
Procedure
Select the cassette
Press the start key and
Does multiple sheets of
paper feed occur?
Deck conveying unit
Adjusting spring
1-6-14
Start
to be adjusted.
make a test copy.
No
Does no paper
feed occur?
No
End
Adjusting spring
Refit the deck conveying unit or
primary paper feed unit.
Remove the deck conveying unit or
primary paper feed unit (see page 1-6-3
Yes
or 1-6-10).
Move the position of two springs in
the direction of the black arrow (
Remove the deck conveying unit or
primary paper feed unit (see page 1-6-3
Yes
or 1-6-10).
Move the position of two springs in
the direction of the white arrow (
Primary paper feed unit
Adjusting spring
Figure 1-6-30
).
).
Adjusting spring