Main Charging Section; Detaching And Refitting The Main Charger Unit - Kyocera KM-6030 Service Manual

1-6-3

Main charging section

(1) Detaching and refitting the main charger unit

Procedure
1. Open front cover and turn the lever A2 to the
left.
2. Remove the toner container.
3. Remove two screws and then pull out the
image formation unit.
4. Remove two connectors and release the
lock lever.
5. Raise the rear of the main charger unit and
slide the unit to machine rear.
Remove the main charger unit from the
image formation unit.
Lock lever
Connector
Image formation unit
Figure 1-6-57
Figure 1-6-58
2FB/2FC
Main charger unit
Connector
1-6-31