Kyocera KM-6030 Service Manual page 89

2FB/2FC-3
Maintenance
item No.
Setting fan motor mode
U059
Description
Specifies whether to rotate the fan motor in sleep mode.
Purpose
To rotate the fan motor for certain period of time to prevent rise in temperature inside the machine in sleep
mode. In default setting, the fan motor stops immediately when switched to sleep mode and too high temper-
ature is detected inside the machine.
Method
Press the start key. The screen for executing is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Display Description
ON
OFF
Initial setting: OFF
2. Press the start key. The setting is set.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
1-4-18 1-4-17-1
Developing fan motor 1/2, cooling fan motor 1/2/3/4, power source fan motor, image for-
mation fan motor and PWB fan motor is rotated at a half speed in sleep mode.
The rotation of developing fan motor 1/2, cooling fan motor 1/2/3/4, power source fan
motor, image formation fan motor and PWB fan motor is stopped in sleep mode.
Description