2FB/2FC
7. Release the inserted part of the operation
unit upper cover and then remove the cover.
8. Remove each screw, and then remove the
slit holder plate and slit glass.
9. Remove each screw, and then remove the
front and rear wire holder plates from the
mirror 1 frame.
Front wire holder plate
1-6-38
Operation unit
upper cover
Slit holder
plate
Mirror 1 frame
Figure 1-6-76
Inserted parts
Figure 1-6-74
Slit glass
Figure 1-6-75
Rear wire holder plate
Slit holder
plate