Kyocera KM-6030 Service Manual page 121

2FB/2FC
Maintenance
item No.
U240 3. To turn ON a solenoid with the motor driving, press the interrupt key before selecting the solenoid.
The driving motor will start operation, and the selected clutch or the solenoid will remain ON until the
interrupt key is pressed again.
4. To stop motor driving, press the interrupt key again.
5. To return to the screen for selecting an item, press the stop/clear key with the motor stopped.
Method: Checking the motor and solenoid of the centerfold unit
1. Select SADDLE at the screen for selecting an item.
2. Select the item to be operated.
Display
SDL_MT_H
SDL_MT_L
SDL_BLD_MT
SDL_CTR_MT
SDL_WDTH_MT
SDL_SOL
3. To turn ON a solenoid with the motor driving, press the interrupt key before selecting the solenoid.
The driving motor will start operation, and the selected clutch or the solenoid will remain ON until the
interrupt key is pressed again.
4. To stop motor driving, press the interrupt key again.
5. To return to the screen for selecting an item, press the stop/clear key with the motor stopped.
Completion
Press the stop/clear key with the operation stopped. The screen for selecting a maintenance item No. is dis-
played.
Checking the operation of the switches of the finisher
U241
Description
Displays the status of each switch of the document finisher.
Purpose
To check the operation of each switch of the document finisher.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Turn each switch ON manually.
When a switch is detected to be in the ON position, the display for that switch will be highlighted.
3. Change the screen using the * or # keys.
Display
FD_IN_SW
EJT_SW
DRM_SW
M_TRAY_FD_SW
P_DET_U_SW
P_DET_D_SW
PCH_BOX_SW
SLAP_HP_SW
P_PUT_SW
STP_FPIN_SW
STP_RPIN_SW
STP_F_CT_SW
STP_R_CT_SW
STP_F_HP_SW
STP_R_HP_SW
CRT_F_HP_SW
1-4-46
Description
Motors and solenoids
Main motor (MM) is turned ON high speed
Main motor (MM) is turned ON low speed
Centerfold blade motor (CBLM) is turned ON
Centering plate motor (CPM) is turned ON
Side registration guide motor (SRGM) is turned ON
Pressure release solenoid (PRSOL) is turned ON
Switches
Paper entry sensor (PES)
Paper ejection sensor (PEJS)
Sub tray paper ejection sensor (STPES)
Intermediate tray paper conveying sensor (ITPCS)
Upper paper conveying belt home position sensor (PCBHPS-U)
Lower paper conveying belt home position sensor (PCBHPS-L)
Punch waste box sensor (PWBS)
Movable guide home position sensor (MGHPS)
Paper holder detection sensor (PHDS)
Front stapler empty sensor (STES-F)
Rear stapler empty sensor (STES-R)
Front stapler cartridge sensor (STCS-F)
Rear stapler cartridge sensor (STCS-R)
Front stapler home position sensor (STHPS-F)
Rear stapler home position sensor (STHPS-R)
Front clincher home position sensor (CLNHPS-F)