Paper Feed Section; Detaching And Refitting The Paper Feed Pulley, Forwarding Pulley And Separation Pulley Of Cassette 1 And 2 - Kyocera KM-6030 Service Manual

1-6-2

Paper feed section

(1) Detaching and refitting the paper feed pulley, forwarding pulley and separation pulley of cassette 1 and 2

Follow the procedure below to clean or replace the paper feed pulley, forwarding pulley or separation pulley of cassette 1
and 2.
Procedure
Detaching the deck conveying unit
1. Pull out the cassette 1 and 2.
2. Open the front cover and pull the deck con-
veying unit out.
3. While holding the lever in the direction of
arrow, remove the deck conveying unit from
the machine.
Lever
4. Remove the stop ring.
5. Open the deck conveying cover and slide
the cover toward the front, and then remove
the cover.
Figure 1-6-1
Deck conveying cover
Deck conveying unit
Deck conveying unit
Stop ring
Figure 1-6-2
2FB/2FC-2.0
1-6-3