Kyocera KM-6030 Service Manual page 102

Maintenance
item No.
Adjusting original size detection
U099
Description
Checks the operation of the original size detection sensor and sets the sensing threshold value.
Purpose
To adjust the sensitiveness of the sensor and size judgement time if the original size detection sensor mal-
functions frequently due to incident light or the like.
Start
1. Press the start key. The screen for selecting an item is displayed.
2. Select an item and press the start key. The screen for executing each item is displayed.
Display
DATA
B/W LEVEL
Method to display the data for the sensor
1. Press the start key. The detection sensor transmission data is displayed.
Display
TAIL EDGE POSI
ORIGINAL AREA
SIZE
2. To return to the screen for selecting an item, press the stop/clear key.
Setting
1. Select an item to be set.
Display
ORIGINAL
LIGHT SOURCE
WAIT TIME
A4R AREA
*Time from activation of the original detection switch (ODSW) to original size judgment
Method to set the original size judgment time
1. Adjust the preset value using the * or # keys.
A larger value increases the original size judgment time, and a smaller value decreases it.
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for maintenance item No. is dis-
played.
Description
Description
Displaying detection sensor transmission data
Setting detection sensor threshold value
Setting original size judgment time
Description
Detected original trailing position
Original size detection
Detected original size
Setting
Original threshold value
Light source threshold value
Original size judgment time*
Original size detection position display (mm)
2FB/2FC
Setting Default
range setting
0 to 255 72
0 to 255 72
0 to 255 150
220/240 240
1-4-29