Kyocera KM-6030 Service Manual page 146

Maintenance
item No.
Clearing the black ratio data
U910
Description
Clears the accumulated black ratio data for A4 sheet.
Purpose
To clear data as required at times such as during maintenance service.
Method
1. Press the start key.
2. Press CANCEL on the touch panel.
3. Press the start key.
The accumulated black ratio data is cleared, and the screen for selecting a maintenance item is dis-
played.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item is displayed.
Checking/clearing copy counts by paper sizes
U911
Description
Displays and clears the paper feed counts by paper sizes.
Purpose
To check or clear the counts after replacing consumable parts.
Method
Press the start key. The screen for the paper feed counts by paper size is displayed.
Clearing
1. Select the paper size. The selected item is displayed in reverse.
To clear all counts, press the reset key.
2. Press the start key. The count is cleared.
When clearing all counts, the screen for selecting a maintenance item is displayed.
Completion
To exit this maintenance item without changing the count, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
Checking the copy counts
U920
Description
Checks the copy counts.
Purpose
To check the copy counts.
Method
Press the start key. The current counts of copy counter and printer counter are displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Checking/clearing the waste toner box count
U921
Description
Displays and clears the value of waste toner box count.
Purpose
To check the period of replacement of waste toner box. Also to clear the count value after replacement.
Method
Press the start key. The count value of a waste toner box is displayed.
Clearing
1. Press the reset key.
2. Press the start key. The value is cleared. The screen for selecting a maintenance item No. is displayed.
Completion
To exit this maintenance item without changing the count, press the stop/clear key.
The screen for selecting a maintenance No. item is displayed.
Description
2FB/2FC
1-4-71