Periodic Maintenance Procedures - Kyocera KM-6030 Service Manual

Periodic maintenance procedures

Maintenance
Section
part/location
Test copy Perform at the maxi-
and test print mum copy size
Maintenance
Section
part/location
Paper feed Paper feed pulleys
section
Forwarding pulleys
Separation pulleys
MP paper feed pulley
MP forwarding pulley
MP separation pulley
Timing switch 1
Timing switch 2
Timing switch 3
Feed pulley
Deck conveying roller
Rollers
Guides
Maintenance
Section
part/location
Main charg- Main charger unit
ing section
Main charger wire
cleaning pad
Main charger wire
Main charger grid
Method Maintenance cycle
Test copy Every service
Method Maintenance cycle
Replace Every service
Replace Every service
Replace Every service
Clean Every service
Check and
replace
Clean Every service
Check and
replace
Clean Every service
Check and
replace
Clean Every service
Clean Every service
Clean Every service
Clean Every service
Clean Every service
Clean Every service
Clean Every service
Method Maintenance cycle
Clean Every service
Check and
replace
Replace Every service
Replace Every service
Clean Every service
Check and
replace
Points and cautions
Points and cautions
Replace after feeding
500,000 sheets.
Replace after feeding
500,000 sheets.
Replace after feeding
500,000 sheets.
Clean with alcohol or a dry
cloth. Replace after feeding
250,000 sheets.
Clean with alcohol or a dry
cloth. Replace after feeding
250,000 sheets.
Clean with alcohol or a dry
cloth. Replace after feeding
250,000 sheets.
Air brush.
Air brush.
Air brush.
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth.
Clean with alcohol or a dry cloth.
Points and cautions
Clean the shield with a wet
cloth and then a dry cloth.
Clean the shield with a wet
cloth and then a dry cloth.
Replace if the grid is damaged
or bending.
2FB/2FC-2.0
Page
Page
P.1-6-3
P.1-6-10
P.1-6-3
P.1-6-10
P.1-6-3
P.1-6-10
P.1-6-19
P.1-6-19
P.1-6-19
Page
P.1-6-31
P.1-6-32
P.1-6-33
P.1-6-32
2-4-7