Kyocera KM-6030 Service Manual page 101

2FB/2FC-3
Maintenance
item No.
Setting: Gradient in photo mode
U093
1. Select the item to be set. The selected item is displayed in reverse.
2. Change the setting value using the cursor up/down keys.
Display
PHOTO DARKER
PHOTO LIGHTER
Increasing the setting makes the change in density larger, and decreasing it makes the change smaller.
3. Press the start key. The value is set.
4. To return to the screen for selecting an item, press the stop/clear key.
Supplement
While this maintenance item is being executed, copying from an original is available in the interrupt copying
mode.
Completion
Press the stop/clear key at the screen for selecting an item. The screen for selecting a maintenance item No.
is displayed.
1-4-28
Description
Setting
Change in density when manual density is set
dark
Change in density when manual density is set
light
Setting Default
range setting
0 to 3 0
0 to 3 0