Kyocera KM-6030 Service Manual page 141

2FB/2FC
Maintenance
item No.
Setting the enterprise mode
U510
Description
Sets whether or not the enterprise mode setting is enabled if an optional network scanner is installed.
This maintenance mode is effective for only 120 V specifications.
Purpose
According to user request, changes the setting.
Supplement
It is not possible to turn setting simultaneously with U511 (Setting scan To FTP) to ON.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Display
ON
OFF
Initial setting: OFF
2. Press the start key. The setting is set.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
Setting scan To FTP
U511
Description
Sets whether or not scan to FTP setting is enabled if an optional network scanner is installed.
This maintenance mode is effective for only 120 V specifications.
Purpose
According to user request, changes the setting.
Supplement
It is not possible to turn setting simultaneously with U510 (Setting the enterprise mode) to ON.
Method
Press the start key. The screen for selecting an item is displayed.
Setting
1. Select ON or OFF. The selected item is displayed in reverse.
Display
ON
OFF
Initial setting: OFF
2. Press the start key. The setting is set.
Completion
To exit this maintenance item without changing the current setting, press the stop/clear key.
The screen for selecting a maintenance item No. is displayed.
1-4-66
Description
Description
Enterprise mode setting is enabled.
Enterprise mode setting is disabled.
Description
Scan to FTP setting is enabled.
Scan to FTP setting is disabled.