Kyocera KM-6030 Service Manual page 60

5. Attach the switch contact plate to the right
rear lower cover using the M4 x 12 flat-head
screw.
6. Pull out the fixing plate of the side feeder,
and insert it into the bottom of the machine's
right cover.
7. Open the right cover.
8. Install two M4 x 6 TP screws in the long
holes of the fixing plate.
Align the V-groove of the fixing plate with the
center of the guide of the machine.
M4 x 6 TP screw
Center of the guide
Long hole
Figure 1-3-51
M4 x 12 flat-head screw
Switch contact
plate
Right rear
lower cover
Figure 1-3-49
Right cover
Fixing plate
Figure 1-3-50
M4 x 6 TP screw
Long hole
Fixing plate
2FB/2FC
1-3-25