Kyocera KM-6030 Service Manual page 69

2FB/2FC-2.0
3. Insert the board support into the elongate
hole. Secure the board support by rotating
either clockwise/counterclockwise for 90
degrees. Be careful not to pinch the power
cable.
4. Connect the security board to the YC27 con-
nector of the main PWB. Secure it with the
board support.
5. Return the right sequence cover and rear
middle cover to their original positions.
6. Plug the machine into a power outlet, and
turn on its main power switch.
7. Confirm that the hard disk icon is displayed
on (the right upper corner of) the touch
panel.
1-3-34
Board support
Figure 1-3-69
Paper Size
None
Auto
Staple
Exposure
Left Top
Exposure Staple
Mode /Punch
Program
Figure 1-3-70
Power cable
Security
board
Hard disk icon
Set
A4
100%
Merge copy
Margin/
Imag.Shift
Erase
Mode