Kyocera KM-6030 Service Manual page 249

Hide thumbs Also See for KM-6030:

Table of Contents

9. Remove two stop rings and bushes, and

then pull out the paper feed pulley shaft.

10. Remove the paper feed pulley and paper

feed pulley gear from the paper feed pulley

11. Remove the forwarding pulley shaft from the

paper feed pulley unit and then remove the

forwarding pulley from the shaft.

12. Clean or replace the paper feed pulley and

forwarding pulley, and then attach the pul-

leys to the paper feed pulley unit.

* When replacing the paper feed pulley, make

sure that the one-way clutch of both the pul-

ley and the gear is placed toward the rear

side of the machine.

pulley shaft

Paper feed pulley

Figure 1-6-24

Figure 1-6-25

Figure 1-6-26

Forwarding pulley shaft

Forwarding pulley

Show Quick Links

Table of Contents