Kyocera KM-6030 Service Manual page 83

2FB/2FC
Maintenance
item No.
Checking the operation of the motors
U030
Description
Drives each motor.
Description
To check the operation of each motor.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the motor to be operated. The selected item is displayed in reverse and the operation starts.
Two or more motors can be selected.
Display
MAIN_TFR_EJE
REG MOT
FEED MOT H
BP CV MOT H
BP FD MOT H
PF MOT3 H
PF MOT4 H
VF MOT H
PF MOT1
PF MOT2
DECK FD MOT
DUP SB MOT
DUP SD REG
DUP FD MT L
FEED MOT L
BP CV MOT L
PF MOT3 L
PF MOT4 L
VF MOT L
MAIN MOT
TFR MOT
EJECT MOT
DUP FD MT H
DLP MOT
3. To stop operation, an item is selected again or press the stop/clear key.
Completion
Press the stop/clear key after operation stops. The screen for selecting a maintenance item No. is displayed.
1-4-12
Description
Motor
The drive motor (DM), transfer motor (TRM) and fuser motor (FM) are
turned ON.
The registration motor (RM) is turned ON.
The feed motor (FDM) is turned ON high speed.
The MP feed motor (MPFDM) is turned forwarding ON high speed.
The MP feed motor (MPFDM) is turned reversing ON high speed.
Paper feed motor 3 (PFM3) is turned ON high speed.
Paper feed motor 4 (PFM4) is turned ON high speed.
The vertical feed motor (VFDM) is turned ON high speed.
Paper feed motor 1 (PFM1) is turned forwarding ON.
Paper feed motor 2 (PFM2) is turned ON.
Paper feed motor 1 (PFM1) is turned reversing ON.
The duplex switchback motor (DUPSBM) is turned ON.
The duplex side registration motor (DUPSRM) is turned ON.
The duplex feed motor (DUPFDM) is turned ON low speed.
The feed motor (FDM) is turned ON low speed.
The MP feed motor (MPFDM) is turned ON low speed.
Paper feed motor 3 (PFM3) is turned ON low speed.
Paper feed motor 4 (PFM4) is turned ON low speed.
The vertical feed motor (VFDM) is turned ON low speed.
The drive motor (DM) is turned ON.
The transfer motor (TRM) is turned ON.
The transfer motor (FM) is turned ON.
The duplex feed motor (DUPFDM) is turned ON high speed.
The developing motor (DEVM) is turned ON.